Guides / is-a-laundromat-a-good-investment

Is a Laundromat a Good Investment? Check Your Town Before You Buy

Search “is a laundromat a good investment” and most of what comes back is written by companies that sell washers, or by owners on Reddit describing their own store. Both are useful about the store. Machine age, the lease, the utility bills, the hours you will spend on repairs. Almost none of it is about the town, which is the one part you cannot change after you sign. A well-run laundromat in a market with more machines than its renters can keep busy is still a bad investment, and a tired one in an underserved town can be a good one.

This guide covers the market half of the decision, for someone choosing between towns. That is exactly what Denzify’s first paying customer was doing. He bought two laundromat reports, for towns he was considering for laundromats of his own.

Why is the honest answer “it depends on the town”?

The business model is simple, and that is the appeal. Customers serve themselves, labor is light compared with most retail, and clean clothes never go out of style. What the model lacks is reach. People carry heavy bags, so a laundromat draws from a short radius, about 1.5 km (just under a mile), and customers rarely drive past one laundromat to reach another. Revenue is set by two local quantities. How many households inside that circle have no machine, and how many machines already serve them.

Both quantities swing widely between towns that look alike on paper, which is why a national average is close to useless here. Measuring them in the same small geography and judging the ratio is the core of any market saturation analysis.

What drives laundromat demand in a town?

Four signals, all free from the Census Bureau’s American Community Survey (ACS 5-year estimates) at the census-tract level.

  1. Renter share. Most owner-occupied homes have washer hookups. Many rental units do not. Table B25003 (Tenure) gives renter-occupied households for each tract.
  2. Age of the housing stock. Older multifamily buildings were often built without in-unit hookups, and adding them means new plumbing and venting, so those households tend to stay laundromat customers. Table B25034 (Year Structure Built).
  3. Building type. Two-to-four-family houses and small walk-ups tend to be the core market. Large newer complexes usually have a shared laundry room or a washer in every unit. Table B25024 (Units in Structure).
  4. Household size and income. Bigger households wash more loads. Income tells you which format sells more than whether laundry sells. Self-service is the core in lower-income renter areas, while wash-and-fold and pickup tend to matter more where renters earn more. Tables B25010 (Average Household Size) and B19013 (Median Household Income).

Population still matters, but only as the container for these signals. Two towns of the same size can hold very different numbers of renters in old buildings. Daytime workers, which matter a lot for a coffee shop, matter little here. People do laundry near home, so the nighttime population the Census counts is the right denominator for once.

How many laundromats can a town support?

This is the supply question, and we measured it. Denzify read and verified every laundromat in 8 comparable mid-size US cities, then divided by population. The median is 0.84 per 10,000 residents, about one laundromat for every 11,900 people. The full benchmark, with FAQs, lives on our page on how many laundromats a town can support. Here is the measured table (data as of July 2026), with each rate turned into residents per laundromat.

CityLaundromats per 10k residentsResidents per laundromatvs peer median
Albany, NY3.313,0003.9x
New Haven, CT2.653,8003.1x
Grand Rapids, MI1.218,3001.4x
Norfolk, VA0.9710,3001.2x
St. Paul, MN0.7114,0000.8x
Knoxville, TN0.6316,0000.7x
Worcester, MA0.5917,0000.7x
Des Moines, IA0.5617,8000.7x

The spread is about 6 to 1 between Albany, NY and Des Moines, IA, the widest we have measured for an established category. In our set, the top of the table is old, renter-heavy northeastern housing. But housing is a demand signal, not a formula. Worcester, MA, a city known for its old three-decker apartment houses, sits near the bottom at 0.59. Shared laundry rooms, pickup services and competitors just past the city line all absorb demand that a city count never sees. That is why the count has to be done inside your trade area, not inferred from demographics. For the same residents-per-store arithmetic on other business types, see how much population a business needs, and the saturation benchmarks for every category we have measured.

How much does a laundromat make a year?

Nobody can answer that for a town they have not measured, and we will not invent a national figure. Industry groups such as the Coin Laundry Association publish revenue and cost benchmarks. Treat any such number as a national average that your town may sit far above or far below.

What you can do is see where the revenue comes from. It is roughly the number of machines, times how many cycles each one runs a day (operators call them turns), times the price per cycle, plus any wash-and-fold or vending income. The machines and the price are your choices. Turns are not. They come from the households without machines inside the radius, divided among every laundromat that serves them. That is why two identical stores in two towns can report very different numbers.

When you are buying, the seller’s books tell you what the turns were, and water bills are the usual way to verify them, since every wash cycle uses water. The market check tells you whether those turns will hold once a newer store nearby finishes winning its customers.

Are laundromats a dying business in 2026?

Not as a category, because the thing that drives demand changes slowly. Old apartment buildings do not get in-unit washers overnight. But the question that matters to you is local, and it can go either way in a given trade area.

  • Signs demand is shrinking. Older rentals converted to condos or torn down, new complexes with a washer in every unit absorbing the renters, and renter households falling between ACS releases.
  • Signs demand is holding. A steady renter base in older buildings, and operators who keep replacing machines and adding card payment or pickup service.

To read the trend, compare two ACS 5-year releases whose five-year windows do not overlap, as the Census Bureau recommends. The category is not dying. A specific trade area can be.

What should a laundromat due diligence checklist cover?

Equipment-maker checklists cover the store well. Machine age and brand, lease term and renewal options, utility bills against reported revenue, the water heater and the venting. Our site selection checklist covers the lease side in depth. What those lists skip is the market, so here it is, in the order we would run it.

Due diligence, the market check

  1. Draw the trade area. A circle of about 1.5 km around the store or the site, cut short where a highway, river or rail line blocks short trips. That circle, not the town, is your market.
  2. Count every laundromat inside it. Search “laundromat,” “laundry,” “coin laundry” and “wash and fold,” and include dry cleaners with self-service machines. Count the ones just across the town line too, because customers ignore city limits. Our guide to counting competitors in your area covers the errors that make counts wrong (duplicates, keyword misses, the wrong radius).
  3. Turn the town’s count into a rate. Laundromats in the town, divided by its population, times 10,000. Compare it with the measured peer range of 0.56 to 3.31, median 0.84. Well above the median means someone already serves most of the demand.
  4. Read demand in the same circle. Renter share, year built, units in structure, household size and median income for the census tracts inside the radius, not the town average.
  5. Check whether competitors are aging or new. On each Google listing, look at the review count, the date of the oldest reviews, and recent photos of the machines. Few reviews and new equipment means a store that opened recently and is still growing. Years of reviews and old top-loaders means the store a newer operator will take customers from. Know which one you are buying, and which ones you would compete with.
  6. Look for supply on the way. Permits or planning agendas for new laundromats, and new apartment buildings with in-unit laundry, both cut into the same demand.
  7. Decide what the market says about buying versus building. The next section covers it.

Should you buy a laundromat or build one?

Equipment and financing comparisons dominate this debate. The market changes the answer more than either.

Buying gets you existing customers and books you can verify, but it also locks in the location and its competitive position. The market check tells you whether the revenue in those books is likely to continue. If the town sits well above the peer median and a newer competitor opened inside the radius recently, the seller’s best years may be behind the store, and the price should reflect it.

Building lets you pick the site, which makes it a white-space question. You want renter-dense tracts in older housing with no laundromat inside the radius. In a town already above the median, a new store mostly splits existing demand, and you win only by taking customers from an older operator, usually with newer machines, card payment and longer hours. In a town below the median with the right housing, a new store can serve demand nobody serves today. Our guide to white space analysis explains why an empty tract is not automatically an opportunity.

Either way, the expensive mistake is the same, paying for a store or a build-out in a trade area that already has more machines than its renters can keep busy.

How do you analyze a laundromat deal against the benchmark?

Here is a worked example. The town and its counts are made up for illustration. The benchmark is measured.

Example A. A town of 40,000 residents with 6 laundromats has 1.50 per 10,000. That is about 1.8x the peer median, and only 2 of the 8 peer cities we measured are denser. At the median rate, a town that size would have about 3. Before buying here, you would want proof of unusually strong renter demand inside the radius, or a store that is clearly the best of the 6.

Example B. The same town with 2 laundromats has 0.50 per 10,000, below the thinnest peer city we measured. That is either a gap or a town of homeowners, and the per-10,000 number cannot tell you which. Renter share and housing age in the tracts around the site decide it.

Which mistakes should you avoid?

  • Judging the town by its population. Two towns the same size can need very different numbers of laundromats. Renters in older buildings set demand.
  • Counting only listings named “laundromat.” Coin laundries, wash-and-fold shops and dry cleaners with machines compete for the same loads.
  • Stopping at the city line. The store a mile away in the next town is in your trade area.
  • Comparing with a national average. Measured comparable cities run from 0.56 to 3.31 per 10,000, so one national number hides the answer.
  • Reading an empty map as an opportunity. No laundromat in a tract of homeowners is not a gap.
  • Trusting the seller’s view of the market. Count the competitors yourself first.

What can you check for free, and what does a report add?

Start with the free part. Denzify’s free market check counts the laundromats in one US city or town, no card needed, which gives you the town-wide count behind step 3 of the checklist.

The full report adds the rest of the market read for that town. Supply against demand, competitor density, a comparison with comparable cities per 10,000 residents, a white-space map of tracts with no competitor, and a 0 to 100 score with an A to F grade and a verdict. It is built from Google Places, Census ACS 5-year estimates and TIGER boundaries, and LEHD/LODES daytime-worker data. One report is $99, or $199 for a 3-Pack if you are comparing towns, and credits never expire. You can read a full sample report first. It covers an açaí shop in Salt Lake City, with the same structure a laundromat report follows.

Whether or not you use Denzify, do the count before you sign. If you are close to a decision, run the market read on your town. The market is the one part of a laundromat you cannot fix after you own it.

Related saturation benchmarks