Guides / market-research-for-small-business

Market Research for a Small Business Before You Sign a Lease

Most advice on market research for small business was written for products. Run a survey, buy an industry report, size the total addressable market. Those are the wrong tools if you are about to open a café, a barbershop or a pilates studio. Your market is a few square miles. The national size of the coffee industry says nothing about whether the corner you toured last weekend can support another espresso bar.

This guide is the local version. Six steps, all doable with free public data, in the order that produces a decision. It is the same sequence a Denzify report automates, and the last section is honest about when paying for that makes sense and when it does not.

What should local market research actually answer?

Three questions, in this order. How much supply already exists for your business type in this town? Is there enough demand to carry one more? Where in town is that demand least served? A market can pass the first two and still fail you on the third, if all the open demand sits across the river from the space you are about to lease.

Can you know if a business will succeed in your area? Not in advance, and nobody honest will promise it. Success depends on your concept, your prices and your execution. What research can tell you is whether the market has room, which removes one avoidable way to fail before you sign anything.

Step 1. Who exactly counts as a competitor?

Write down your business type the way a customer would search for it, then list everyone else who gets that customer’s money. A specialty café competes with chains and drive-throughs, and partly with gas-station coffee. A reformer studio competes with other pilates studios, partly with yoga studios, and barely with a budget gym. Decide this before you count, or you will keep adjusting the definition until the count says what you hoped.

Keep two lists. Direct competitors sell the same thing to the same customer. Partial substitutes absorb some of the same demand and deserve a discounted weight, not zero. Our guide on how to count competitors in your area covers keyword misses and duplicate listings, the two errors that distort this step most.

Step 2. How far do your customers travel?

Competition is local, but not equally local for every business. People rarely walk far for a routine coffee, and they will drive across town for a dentist they trust. The distance a business draws most of its customers from is its trade radius. These are the radii Denzify uses per category.

Business typeCompetition radiusIn miles
Coffee shop600 m0.37
Restaurant800 m0.50
Barber shop1.2 km0.75
Coworking space1.5 km0.93
Yoga studio2 km1.24
Gym2.5 km1.55
Medical clinic3 km1.86
Dentist4 km2.49
Physical therapy clinic4 km2.49

Do two counts. The first is citywide, every competitor inside the city or town limits, which you need for the benchmark in step 5. The second is the radius around each address you are considering, which tells you how crowded that specific spot is. A café two miles away is not your rival, and the one 400 meters away is. Google Maps works for both counts if you search a few keyword variants, zoom in until the pins stop changing, and write down names so you can strike duplicates and closed listings.

Step 3. Is there demand for your business in your town?

Start with residents and income. The Census Bureau’s American Community Survey 5-year estimates, free on data.census.gov, give population (table B01003) and median household income (table S1901) for your city and for each census tract inside it. A tract is a neighborhood of a few thousand people, small enough to show where demand concentrates.

Income weighs more for some businesses than others. A barbershop sells a near-necessity, so headcount carries most of the weight. A boutique studio or a specialty bakery sells something discretionary, so income decides how many neighbors can pay your price. For a laundromat, the share of households that rent (table B25003) tells you more than income does. If your concept is premium, look for tracts whose median income sits well above your city’s, not just for a big population.

Census QuickFacts gives citywide totals in a minute. It is a fine first look and a poor final answer, because your customers come from a radius, not a municipality.

Step 4. Who is in town during the day?

Census population counts people where they sleep. If you sell anything on a weekday, lunch, coffee, a gym session before work, a haircut at noon, you also need the people who work nearby. The Census LEHD program publishes this as LODES, and its free OnTheMap tool counts the jobs inside any area you draw.

Compare the two numbers. A downtown with more workers than residents supports more weekday businesses than its population suggests, while a commuter suburb empties out during working hours. Neither is good or bad on its own. What matters is whether your busiest hours match the hours people are actually there.

Step 5. Does your town already have enough of them?

Now turn the citywide count into a rate. Divide your count by the population and multiply by 10,000. A rate is the only fair way to compare a town of 30,000 with a city of 300,000.

Then compare the rate with a benchmark. A national average is a starting point, but it blends dense downtowns with rural counties. Across the 40 large cities we measured, coffee-shop density ran from 2.88 per 10,000 in Memphis to 10.98 in Miami. Comparable cities, similar in size and income, are the better yardstick. Our population-needed calculator does this arithmetic for you. The table shows what each benchmark implies for an example town of 30,000 residents.

Business typePer 10,000 residentsBasisExpected in a town of 30,000 (example)
Coffee shop4.2US average12.6
Restaurant28US average84
Barber shop8US average24
Gym2.1US average6.3
Yoga studio1.2US average3.6
Dentist4.5US average13.5
Laundromat0.84Median of 8 measured cities, 0.56 to 3.312.5 (1.7 to 9.9)
Pilates studio0.55Median of 12 measured cities, 0.29 to 1.401.6 (0.9 to 4.2)
Coworking space0.89Median of 12 measured cities, 0.44 to 1.632.7 (1.3 to 4.9)

A worked example, with an invented town. You are considering a laundromat in a town of 30,000 and count 2 inside town limits. That is 0.67 per 10,000. The median of the 8 cities we measured is 0.84, or about 2.5 laundromats for your town, so you sit a little under the middle. That gap is too small to call the town underserved, because the measured range runs from 0.56 to 3.31. The tiebreaker is demand. As our laundromat benchmark explains, renter share and old housing stock drive that spread, so a town of renters in older apartments leans toward the high end and a town of newer owner-occupied homes toward the low end.

One caution. Your count and the benchmark must be measured the same way. The national norm of 2.1 gyms per 10,000 counts dedicated fitness centers, while a “gym” search on Maps also returns CrossFit boxes and martial-arts studios. That is one reason 34 of the 40 cities in our gym market ranking sit above that norm, with the middle of the table at 3.15 per 10,000 (Sacramento). Compare like with like. More measured benchmarks live on our saturation pages by industry, and the reasoning behind the ratio is in our market saturation analysis guide.

Step 6. Where are the underserved pockets?

A citywide rate can hide a crowded downtown and an empty east side. The last step is spatial. Drop a pin for each competitor you counted, sketch its trade radius around it, and lay the census tracts over the top. Tracts that hold real population and sit outside every circle are white space. Denzify flags a tract as white space when it has more than 500 residents and zero competitors inside the category radius.

Empty does not mean opportunity. Some tracts are empty because nobody is there at the hours you need, because zoning keeps storefronts out, or because a highway cuts them off. Before you fall for a white spot, check that it passes steps 3 and 4 on its own. Our white space analysis guide walks through that check.

Which free sources do this job?

  • Google Maps for the competitor counts. Best free coverage, but you do the deduplication.
  • data.census.gov for ACS population, income and renter share, citywide and by tract.
  • OnTheMap for daytime workers from LEHD/LODES.
  • County Business Patterns for annual establishment counts by industry code. A useful cross-check on your Maps count, but it lags the present by a couple of years and groups businesses by industry code, not by concept.
  • Your local Small Business Development Center (SBDC) for free, SBA-funded advising. Many centers will help you read this data, and some can pull reports from paid databases at no charge.

When is a paid market report worth it?

If the free method gives a clear answer, trust it and keep your money. A town at several times the benchmark with no white space does not need a second opinion, and neither does one with a healthy population and almost no competition.

Paid research earns its keep in the ambiguous middle, which is where most interesting locations land, and when you are comparing several towns. By hand, the slow parts are the tract-level demand pull, the daytime-worker layer and the benchmark against comparable cities, because that last one means repeating the whole exercise somewhere else.

Denzify does those steps for one business type in one US city or town. Start with the free market check, which counts the competitors for your business type in your city. The full report adds supply against demand, competitor density at the per-category radius, a comparison with comparable cities per 10,000 residents, a white-space map, and a 0 to 100 score with an A to F grade and a verdict. It is built from Google Places for businesses, Census ACS 5-year and TIGER for residents and tract boundaries, LEHD/LODES for daytime workers, and OpenStreetMap for foot-traffic proxies. A report is $99, or $199 for a 3-Pack of credits that never expire.

It has limits. It grades a market, not a storefront. Foot traffic is a proxy built from transit stops, schools and offices, not phone data. It will not read your lease. You can judge the output before spending anything in the public sample report, an açaí bowl shop in Salt Lake City that scored Grade B, 67 out of 100, with 13 competitors inside city limits, 34 tracts with none, and 1.44 daytime workers for every resident.

Which mistakes should you avoid?

  • Researching the industry instead of the town. National market size says nothing about your corner.
  • Counting at the wrong distance. A citywide count for a café and a one-block count for a dentist both mislead.
  • Mixing measurement methods. A padded keyword count against a clean establishment norm makes every town look crowded.
  • Ignoring daytime workers. A weekday business lives on the people who work nearby, not only the ones who sleep there.
  • Reading an empty map as demand. Zero competitors can also mean zero customers.
  • Asking friends instead of counting. Friends say they would come. Counts show what the town already supports.

Do the free version this week, before you tour another space. If your numbers land in the gray zone, run your city and business type through Denzify and compare its read with yours. If the two disagree, one of you missed something, and that is worth knowing before the lease is signed.

Related saturation benchmarks